Hell,
Im trying to load another dps5 tune in my ecu with another os, I cant fully flash back to the same tune I once had as the program pcm with currently loaded os button is not highlighted or available....why cant I do a full reflash?
Trying to load another OS, program pcm w current os not available?
Hell,
Im trying to load another dps5 tune in my ecu with another os, I cant fully flash back to the same tune I once had as the program pcm with currently loaded os button is not highlighted or available....why cant I do a full reflash?
timvan,
I'm new to EFIL and have the same problem unless I have the module connected to the computer BEFORE I start the tune prog. I thought it was because I upgraded a V1 personal.
Just a thought,
S
Here are some helpful links:
Basic Tuning Links, Joecar's "lost bolts", Joecar's BBL setup pics, GM PCM Info, Acronyms for beginners, -- SSpdDmon's Tuning Method, Tuning Spreadsheet, Idle Tuning
Personal Junk, Saved Information,
Register your V2 and you don't have to have it plugged in....Originally Posted by acomp917
Click on HELP in TuneTool, click on register and fill in the info....
2008 2WD Ext.Cab Silverado 1500 6.0 V-MAX E38(L76) & T42(4L70E) MAF Only CL Corvette Servo AFE CAI INNOVATIVE LM-2 WBO2
FLASHSCAN V2 & AUTOCAL
Yep, has to be registered (with a Commercial V1 or higher, or any V2) and the FlashScan must be plugged in before opening the Tune tool. Then the BIG red arrow will be available, press to full flash.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
That was the ticket! Thanks!
Posting Permissions
Reply With Quote