Results 1 to 2 of 2

Thread: Could I get a couple pointers from this data log?

  1. #1
    New Member
    Join Date
    Jul 2012
    Posts
    2

    Default Could I get a couple pointers from this data log?

    I figured it would be better to post here than CompD for EFI help..
    There seems to be a lot of room to improve on this basic tune I am running now. Some things I want to work on are

    1 Feels like it could run smoother or with less rattle.
    2 I have a good bit of around town smoking (30% or less throttle) that I'd like to eliminate as well.
    3 Feels a bit sluggish and slow to spool charger.

    Also, best I can tell from the logging, the trans isn't producing any more than 99.7 psi.. Is this line pressure?

    I'd appreciate any help here guys.
    This log shows my basic driving around some back roads, I think the a/c being on made some irregular readings at idle.
    Attached Files Attached Files

  2. #2
    New Member
    Join Date
    Jul 2012
    Posts
    2

    Default

    Figured I better fill in the sig.. also, the log was an easy drive, then a pause, and repeated the same.
    2006 Cummins Mega 4x4. EFI, Arson, 63-68/.91 non gated.

Similar Threads

  1. How to Data Log?
    By duramax07tmd in forum Diesel
    Replies: 13
    Last Post: May 13th, 2011, 01:28 PM
  2. Couple issues, can someone look at my log?
    By thunderstruck507 in forum Gen III V8 Specific
    Replies: 16
    Last Post: August 1st, 2010, 04:31 AM
  3. Log data freeze
    By Rusty in forum Gen III V8 Specific
    Replies: 9
    Last Post: January 20th, 2009, 08:40 AM
  4. Data Log steps
    By meshoooo in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: October 25th, 2008, 07:05 AM
  5. L92 Data log
    By etmotorsports in forum Gen IV V8 Specific
    Replies: 0
    Last Post: January 26th, 2008, 05:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •