Results 1 to 5 of 5

Thread: 2011 ls7 crate motor misfire

  1. #1
    New Member
    Join Date
    Apr 2014
    Posts
    5

    Default 2011 ls7 crate motor misfire

    I have a LS7 crate motor with automatic trans that has misfired under heavy load sence new. Running at part to moderate throttle it runs smooth as well as cruising speed. I have had it dyno tuned but the misfire has gotten worse. I have changed plugs with no luck. No Codes.
    Billy

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Log files...?

  3. #3
    New Member
    Join Date
    Apr 2014
    Posts
    5

    Default

    I have a new flashscan and can't seem to get live data to work. My computer seems to lock up. I'm trying to work with customer service on this and having a bit of difficulty communicating.
    Billy

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Hey Billy,

    When does your PC lockup...?

    Try re-downloading V7 and V8 software, and re-installing... make sure you are logged in as Admin.

    After you install V8, you also have to flash firmware in to V2, and you have to configure V2.

    -Joe

  5. #5
    New Member
    Join Date
    Apr 2014
    Posts
    5

    Default

    Customer service found problems with my laptop and trying to get them fixed.
    Billy

Similar Threads

  1. 330hp vortec crate motor timing issues
    By Age08 in forum Vortec V6/V8 Specific
    Replies: 24
    Last Post: May 21st, 2013, 02:04 AM
  2. Replies: 9
    Last Post: September 30th, 2011, 04:23 PM
  3. January 31st 2011 pre-release (Updated Feb 03, 2011)
    By Blacky in forum Software Updates and Installation Help
    Replies: 21
    Last Post: February 24th, 2011, 06:14 PM
  4. GM Performance Crate Motors
    By TurboCamaro in forum Conversions / Aftermarket Parts
    Replies: 11
    Last Post: October 6th, 2010, 05:45 PM
  5. GM LS Crate Engine Tuning
    By TurboCamaro in forum General (Petrol, Gas, Ethanol)
    Replies: 17
    Last Post: September 9th, 2009, 04:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •