Apr 13, 2024, V8.4.51 Beta Release

[Tre-Cool]

yeah happy to give it a go. i can swap out 1 of the existing units in 1 of my cars with the can version (i still used the older analog wiring in that).

I'm in Perth, so will get to workshop around 9-10am my time in the morning.

As for the standalone logging, I did update the options file on my & customers v3 device to try and get ecu/tcm/aem working but it wouldn't show up. I was opening the options file in the V8 bbx & programming it.

Or do i need to copy the file manually via explorer to the v3 also?

E38-Man|, Y, E38&AEM, 1, , J1979
E38+T43|, Y, E38&T43, 2, , J1979
E38|T43+AEM, Y, E38&T43&AEM, 3, , J1979

; (E38|T43+AEM)
*PSL_03
;
;Node PID Custom (Cap:Units:Prec:Fact:Offs:Inv) Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------- ------------------------------------------------- -----------------------------------------
ECM.VPWR, N:::0:1:0:N, 0:N:0:N:0:10:0
ECM.APP, N:::0:1:0:N, 0:N:0:N:0:10:0
ECM.E85R, N:::0:1:0:N, 0:N:0:N:0:10:0
TCM.VSS, N:::0:1:0:N, 0:N:0:N:0:10:0
ECM.EOPS, N:::0:1:0:N, 0:N:0:N:0:0:0
TCM.TRQENG_C, N:::0:1:0:N, 0:N:0:N:0:0:0
ECM.RPM, N:::0:1:0:N, 0:N:0:N:0:0:0
ECM.ECT, N:::0:1:0:N, 0:N:0:N:0:0:0
ECM.IAT, N:::0:1:0:N, 0:N:0:N:0:0:0
EXT.AD3, N:::0:1:0:N, 0:N:0:N:0:10:0
ECM.MAP, N:::0:1:0:N, 0:N:0:N:0:0:0
EXT.WO2AFR1, N:::0:1:0:N, 0:N:0:N:0:0:0
EXT.WO2LAM1, N:::0:1:0:N, 0:N:0:N:0:0:0
ECM.SPARKADV, N:::0:1:0:N, 0:N:0:N:0:0:0
ECM.KNKRET, N:::0:1:0:N, 0:N:0:N:0:0:0
ECM.ETCTP, N:::0:1:0:N, 0:N:0:N:0:0:0
ECM.INVLVTMP_M, N:::0:1:0:N, 0:N:0:N:0:0:0
AEM.BENAEMAD4, Calc
AEM.BENAEMAD3, Calc
ECM.APCYL_M, N:::0:1:0:N, 0:N:0:N:0:0:0
AEM.AD4LAMBDA, Calc
EXT.AD4, N:::0:1:0:N, 0:N:0:N:0:10:0
ECM.EQ_RAT, N:::0:1:0:N, 0:N:0:N:0:10:0
TCM.TFT, N:::0:1:0:N, 0:N:0:N:0:0:0
TCM.TCCSLIP, N:::0:1:0:N, 0:N:0:N:0:0:0
TCM.GEAR, N:::0:1:0:N, 0:N:0:N:0:0:0
TCM.SHIFT34, N:::0:1:0:N, 0:N:0:N:0:10:0
TCM.SHIFT23, N:::0:1:0:N, 0:N:0:N:0:10:0
TCM.SHIFT12, N:::0:1:0:N, 0:N:0:N:0:10:0
GPM.WO2S11

I may have just answered this myself. i loaded up the options file, then used the bbx screen to save it as another file name. then opened the txt file & the W02S11 has been stripped.

[Blacky]

I may have just answered this myself. i loaded up the options file, then used the bbx screen to save it as another file name. then opened the txt file & the W02S11 has been stripped.

Correct, you have to edit the Options.txt file and upload it manually using EFILive Explorer. The V8 software will only allow 2 controllers.
Regards
Paul