Results 1 to 10 of 10

Thread: No Kickdown?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. September 3rd, 2006 #1
    DrX
    DrX is offline
    Lifetime Member
    Join Date
    Oct 2005
    Posts
    551

    Default No Kickdown?

    My PCM does not seem to be responding to the throttle kickdown tables. So when part throttle boost kicks in the engine just loads up, resulting in knock. In the screenshot below kickdown should have occurred at around 32% TPS but didn't happen until close to 70%. Did I screw up or is something else going on? I also tried playing with the TCC release vs TPS table to no avail. Factory values are all set to 100% in that table.
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: Kickdown2.JPG  Views: 393  Size: 157.7 KB  ID: 921   Click image for larger version.  Name: Kickdown.JPG  Views: 411  Size: 160.4 KB  ID: 922   Click image for larger version.  Name: TCC Release.JPG  Views: 376  Size: 162.8 KB  ID: 923  
    2017 Camaro SS, 2014 Ram 2500 4x4 Cummins 6.7L, 2004 Chevy Avalanche Z71 4̶X̶4̶(now 2WD), 5870lb race weight, 10.93@ 124, Twin TVS1900s, Twin Throttle, 429 LSX, 4L80E, custom 14 bolt rear, V2, R̶o̶a̶d̶R̶u̶n̶n̶e̶r̶(dead), COS3......
    Gettin' the Groceries
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. converter unlock on WOT kickdown
    By DURAtotheMAX in forum Allison 5 & 6 Speed
    Replies: 4
    Last Post: May 21st, 2014, 09:40 AM
  2. When throttle kickdown is not set at 100%
    By joecar in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 31
    Last Post: August 27th, 2012, 06:34 AM
  3. Trans KickDown
    By Wolfie in forum Gen III V8 Specific
    Replies: 2
    Last Post: February 25th, 2009, 02:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules