From another thread (http://forum.efilive.com/showpost.ph...1&postcount=4).
Please remember that in this initial release that the AD inputs are not going to be available, nor are DMA PIDs.
From another thread (http://forum.efilive.com/showpost.ph...1&postcount=4).
Please remember that in this initial release that the AD inputs are not going to be available, nor are DMA PIDs.
Andrew
EFILive Crew
When you say that the AD inputs are not going to be available... you mean available to be logged internally right? I can still log with my laptop and use AD inputs for Wideband 5v for example like I could before?
Because in the announcement page, under "What has not been implemented in the first beta release", DMA pids (#2) it says "although they can still be logged using a laptop in pass-through mode"
However it does not say this after External PIDs (#1).
I just wanna make sure before I take the plunge.
Thanks
Last edited by Goldfinger911; November 22nd, 2007 at 03:35 PM.
I would assume that the AD inputs would work in pass through, but to be honest I'm going to be trying the V2 BBL at the same time as you I have used it on the AutoCal development platform, where there are no AD inputs.
I'll be talking to Paul soon so will ask and post back.
Andrew
EFILive Crew
It officially Friday here in the US....
I'll take this kind of waiting over sleeping outside in 38 degree weather just to get a $290 laptop at Best Buy......
Hello Black Friday......(In our case it's Blacky Friday)
99 Silverado 2500 Extracab Longbed
33" BFG's - American Racing Rims
Custom Dual Upper console gauge mount w/Autometer Sport Comp - Pyro, Oil Temp
Autometer Sport Comp Boost/Vac in Custom Hypersonic Gauge Mount in dash
LS-1 6.0L w/AFR 205cc Street Heads
Vortech V2 blower
42# Injectors
Comp Cam - Custom Street Grind
TTS Catback Exhaust
Innovate LC-1 Wideband O2
Tune and Trans mods via EFILive V1-V2
It is not being uploaded tonight.
I was doing verification of the A/D calibration scalers during the bootblock upgrade and the factors and offsets are not being rescaled correctly. Normally that wouldn't be a show stopper as they could have been recalibrated once the bootblock upgrade was complete. However the A/D calibration is one of the few things that has not been inplemented (yet) in the new BB logging firmware. (I am working on a simpler A/D calibration option).
I will be working Saturday (here) to fix the A/D re-scaling during the bootblock upgrade. And I will hopefully be able to post it Saturday night here, Saturday morning US time.
Sorry for the delay.
Regards
Paul
Before asking for help, please read this.
Working correctly is always good.
I'll wait.
99 Silverado 2500 Extracab Longbed
33" BFG's - American Racing Rims
Custom Dual Upper console gauge mount w/Autometer Sport Comp - Pyro, Oil Temp
Autometer Sport Comp Boost/Vac in Custom Hypersonic Gauge Mount in dash
LS-1 6.0L w/AFR 205cc Street Heads
Vortech V2 blower
42# Injectors
Comp Cam - Custom Street Grind
TTS Catback Exhaust
Innovate LC-1 Wideband O2
Tune and Trans mods via EFILive V1-V2
ahhhh,Originally Posted by Blacky
this means little to me, for i like using my laptop
for RTACS with my roadrunner.
it will be a nice addition to the V2 but personally
i think RTACS is THE only way to use the V1/V2.
maybe someday it will be able to link directly
with the RR/WBO2 and be used like BBL.
Is there any word on when the 7.5 full release will be available? also , will black box logging update simultaneously with it?
In the next week or two, and yes BB logging will be included in the 7.5 release.
Regards
Paul
Before asking for help, please read this.