Another successful swap!

DPS · June 7th, 2009

Please excuse my newbieness. After mentioning this in 2 other threads I stumbled across this section. It seems like this would have been the place to start.

I recently helped install the EFI Connection's conversion kit on a '93 LT1 car to eliminate the Opti. We have a pretty decent baseline and the car runs OK. If anyone has any fuel or spark tables that they'd like to share we'd appreciate it.

The car is SD with an M6. LT1 Hot Cam Kit and headers. We're currently running closed-loop until my dyno and WBO2 show up.

Excellent job with the kit Mike. It fired on the first attempt!

-Brad

joecar · June 8th, 2009

Brad, welcome to the forum...

June 7th, 2009	#1
DPS New Member Join Date: Apr 2009 Posts: 6	Another successful swap! Please excuse my newbieness. After mentioning this in 2 other threads I stumbled across this section. It seems like this would have been the place to start. I recently helped install the EFI Connection's conversion kit on a '93 LT1 car to eliminate the Opti. We have a pretty decent baseline and the car runs OK. If anyone has any fuel or spark tables that they'd like to share we'd appreciate it. The car is SD with an M6. LT1 Hot Cam Kit and headers. We're currently running closed-loop until my dyno and WBO2 show up. Excellent job with the kit Mike. It fired on the first attempt! -Brad

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

June 8th, 2009	#2
joecar Moderator (Lost Bolts) Join Date: Apr 2003 Location: So.Cal. Posts: 9,526	Brad, welcome to the forum...