HELP!!! Flashscan V2 problems

[markmac3]

OK Guys, I was working on a tune, and everything was going great, but when I unplugged the flashscan from the pc to move everything outside, it all went wrong. The pc doesn't recognize the flashscan at all. I uninstalled the program from the pc, reinstalled everything, and the flashscan is still not recognized by the pc. When I try to upgrade the firmware I get a message "cant connect to Flashscan V2. The parameter is incorrect. Win32 error:87". Any ideas would certainly help. Thanks,

[markmac3]

The USB Controller is recognizing the Flashscan as a FTDI FT8U2XX Device instead of FlashscanV2

[joecar]

You need the FTD2xxx driver on your PC: http://download.efilive.com/drivers/...vers_3_1_2.zip

Instructions:

1. Unzip the contents of zip file into a temporary folder.
2. Included in the zip file are three installation documents. Follow the instructions in the document that matches your PC's operating system.
3. Where the instructions require you to browse to the EFILive\Drivers folder on the CD, substitute the temporary folder into which you extracted the contents of the zip file.

showthread.php?p=20408#post20408

http://www.ftdichip.com/Documents/In...tion_Guide.pdf

[markmac3]

Thanks, I'll try that

[markmac3]

No luck...it still does the same thing. When I try to open the stock .tun file from my pickup, it gives me an unregognized PCM warning. Anyone else have any ideas?

[Tordne]

So is the problem:
- That V2 drivers are not working?
- that the PCM image that you read is not recognised?

[neil]

Is laptop looking for a device that doesn't exist?
You haven't had a FTDI device previously installed?
If so you might try uninstalling it including any registry entries.

Regards,

Neil.

[Tordne]

Spend almost on hour on the phone... Couple more things to try. We'll get ya sorted

[markmac3]

yeah guys, just a quick thanks again to andrew for all the help last night...it's good to know that when problems arise, there are people out there willing to do what it takes to get us beginners going again!!!

CHEERS

[Tordne]

Happy to help... Hopefully you'll be back in business soon!