Activity Stream

I have checked my VIN input multiple times and it is correct.

Thanks for your response. I have the TQ reduction set to "by spark option" with all other settings indicated with "no". Any other suggestions? ...

Check the setting of B0517. Try setting it to no.

GMPX, im running into newer cummins files i can upgrade OS to CSP4, may i need an upgraded calibration set? latest v7.5 downloaded and installed,...

I didnt say you could use 15 file in 18 truck, I said you could use 18 file for 13-18

I have not witnessed that. I have placed a known good file for a 2015 truck onto a 2018 truck and codes for the MAP and MAF sensor existed. Yes,...

Ok, Makes complete sense. So I guess this is where it gets weird because my range is 0 - 65535. Can guarantee that it didn't make it that far in...

18 file should work fine for 13-18

The OS is in the list of compatible with the car I’m working on, I guess to add to my question is, is there any compatibility issues using a marloo...

When it says "Locked with custom Key", that means it has tried all the keys in the range specified. There is no "restarting" in that case - since it...

Giving this a try. I did get it going, but after about 2225 keys it said "Locked with custom Key" So i checked the "Restart" box and now its...

I think if you prefix the hex value with $ it will accept it. Like $0000 and $FFFF. Note: that should be true of most integer fields in the...

Is it possible to have the Try Key Range for unlocking LLY and LB7 controllers accept a hex value? It seems to only take decimal. But if you enter a...

Having trouble finding that one. What is your engine serial ? I will download it for you.

I posted a new thread about this here: https://forum.efilive.com/showthread.php?29897-misfire-logging&p=254023&viewfull=1#post254023

That file is quite new as it's a service flash. You may be best off to go back to the predecessor file.

You can flash a 13 to 17 file into an 18 and an 18 file in to a 13 to 17 truck. You should try it. It won't be right.... User defined parameters...

I heard that you can flash in a 2018 file into the 2013-2017 trucks. Is this correct? Also is there now user-defined parameters.

Nothing extra, it was more for GM gas ECM's.

joecar, I was not able to find CKREFCYL. This really needs to be a new post, and I can do that if you like. I am on to another issue, trying...

Dont think so cause my wideband innovate works fine. The only difference between innovate and plx is i need to use a 2.5mm to 3.5mm adapter on the...

Will not let me save pdf but here is screenshot