Activity Stream

Not possible to go to an older version. They changed the cam design for the fuel pump and exactly this flash is working only on this car. There are...

Thank

Didn’t mean to sound rude I have a 13 and my CTT files have all used an 18 file....

Wow, pardon my struggles with English... I have not tried an 18 file in a 13 to 17 truck. I will have to give that a go.

It’s all good, put in the marloo file, happy days

As far as I know, I have all the TQ limits for traction control set very high. There is a chance I might be missing something in one of the settings,...

Only thing I can think of is Traction Control ?

is anti theft on?

Hey, That smell that you are smelling may not actually be related to any tuning you have done but rather overcharging the batteries or possibly...

What about with the tune you read out of it, or a 100% known stock tune? (sometimes some of the handheld tuners don't do a true return to stock).

I finally managed to get the truck to fire up decent in the cold, down to 20* F coolant temp, and still idle and drive almost as good as a stock cam....

I have checked my VIN input multiple times and it is correct.

Thanks for your response. I have the TQ reduction set to "by spark option" with all other settings indicated with "no". Any other suggestions? ...

Check the setting of B0517. Try setting it to no.

GMPX, im running into newer cummins files i can upgrade OS to CSP4, may i need an upgraded calibration set? latest v7.5 downloaded and installed,...

I didnt say you could use 15 file in 18 truck, I said you could use 18 file for 13-18

I have not witnessed that. I have placed a known good file for a 2015 truck onto a 2018 truck and codes for the MAP and MAF sensor existed. Yes,...

Ok, Makes complete sense. So I guess this is where it gets weird because my range is 0 - 65535. Can guarantee that it didn't make it that far in...

18 file should work fine for 13-18

The OS is in the list of compatible with the car I’m working on, I guess to add to my question is, is there any compatibility issues using a marloo...

When it says "Locked with custom Key", that means it has tried all the keys in the range specified. There is no "restarting" in that case - since it...

Giving this a try. I did get it going, but after about 2225 keys it said "Locked with custom Key" So i checked the "Restart" box and now its...

I think if you prefix the hex value with $ it will accept it. Like $0000 and $FFFF. Note: that should be true of most integer fields in the...