Activity Stream

Hey Joe.. SO, has EFI LIVE added a pid to help scan and log the AEM pid? That sounds like a cool feature, but not having serial is not a great...

Thanks for the Link joecar, I will poke around there and see what I can learn. As an update I installed the injectors over the weekend however I only...

Subscribing...

Also, do you have data for "Minimum Transient Pulsewidth" (B9021)...?

Is your FPR referenced or un-referenced (from what you said, sounds like referenced)...? See this: Calculating-Injector-Flow-rate

Which stickies did you read thru...?

Also: what are you doing with "(({CALC.AEM_AFR}-{GM.AFR})/{GM.AFR})*100", how are you adding that much percent to the VE table...? If you use...

Important: are you seeing a MAF DTC...?

Do the IAT and MAP pids show correct values...? Post a log file.

You got it going...?

I don't see a cax mapping for 12614676. ( hmmm, does the 2007 Y-car use an LS1B or an E40...? )

Post the stock tune .ctz file.

I'm sorry, I did not see any emails (my email provider blocks @gmail and @yahoo)... it is easier for me if you post pics and files here.

In your ctz file, the TCC release tables are set to 318 mph... this keeps your TCC unlocked.

Log shows that TCM never commanded TCC lock...

Post tune. Log GM.KR and post log.

Did you ever figure this out I am having somewhat of the same issue?

It is an engineering marvel, no doubt about that... but it is complex, and I like my critical systems to be simple :) :)

When you connect to a PC, unplug the USB cable and replug it... when you do this, does any notification appear on the Windows tray (nets to the...

Did that. Was not there. I'm sure the stupid tech II changed it. I'm pretty much a rookie to the flashing/tuning world and likely partly to blame. I...

In V8 software, goto the VIN Licenses page, see if shows your PCM's serial number as you see it in your pic above.

Good deal, thanks for confirming.

Capture logs and post here.

The AEM 03-0333/0334 do not have serial comms (please correct me Dr.Mike).

No... the AEM 30-0333/0334 connects to FSV2 via the CAN bus.

Is this ground connected to vehicle/chassis ground...? Try this.

:cheers:

I'm dealing with the same thing in my 95 Camaro LT!/24X/0411 conversion. I used the same kit from EFI Connection. I've done the same thing as you...