Activity Stream

Any suggestions for reading the stock file? My understanding is that I will probably be best off using CalTerm or might be able to use TunerPro with...

Send me a list of your mods. Also LBZ ECUs are also very unstable if you have a bench I would use that. I have one in case it faults out.

Maybe not if you want me too I can try a few things that have been known to work if you can send me your file when you have time. I know I can do it...

Got it figured out thanks.

This is what the screen looks like after trying to reset my V2FS. Added for previous post thanks Sent from my SM-G998U using Tapatalk

Been emailing back and forth with Paul he sent me some instructions to factory reset so did that but now the screen on FlashScan is washed out. ...

Yes Sent from my SM-G998U using Tapatalk

Just for other customers' reference, this problem was also reported on our help desk ticket system. The customer rolled back the software to V8.3.22...

BTW: you can replace this: if X then return true else return false end

The filter calc pid returning true means the sample is filtered out from the dataset.

That's what I would figure to do. From my previous job at a car maker I remember the Arduino library supports CAN bus messages.

See here (scroll down): https://service.efilive.com/kb/articles/pin-assignments

Do you mean when you update FSV2 Firmware...? Post some screenshots.

Seems PPE who used to make a vats bypass box have now discontinued it.... so im up the creek without a paddle now

It’s clear I need a bit more information than what’s floating around. Any suggestions on where to start?

Well, so far it looks like you have to do it with calculated PIDS. at the pid selection screen you can click the little triangle on the config...

I’m with you…..can’t figure it out :-(

Hi, After installing this version my software can no longer recognize the USB connection on my AutoCal, I get hit Error $0101: No data received. ...

Hi Millsy, You can apply the patch on later model years (i.e. VF) even if it is not necessary. I was just pointing out that it is only strictly...

Thanks Paul, After looking through some old VF E38 and VF E67 tunes, it appears I have still applied the patch to mafless VF E38 tunes. As you...

We have not removed any of the patches. It's just that some OSes do not have the patch implemented. The 2 VF GTS controllers must have had different...

Not removed, just moved to be a drop-down option under the button. Regards Paul

Why was the save dash removed?????????

Nope the SAE table does nothing to help

Referencing your 52210052 file I can see what you're talking about and I agree now that the SAE table doesn't do much good. ( Again I'm learning as...

The fault index table uses Cummins fault codes so you need to use the P code table in the tune file to know exactly which Cummins fault code is using...

In the tune files themselves is a table that tells you exactly what Cummins fault codes are used in the tune file, the fault index table, MIL table...