- BB Logging beta version is now available
- Post your "Splash Screen" images
- Getting PIDS to V2?
- Can't read PCM after BBL upgrade.
- Error codes and descriptions
- Logging with PC after upgrade to BBL
- Updating to BBL Firmware problems
- V2 Stuck in dead poll
- POST (Power On Self Test) Errors
- BB Logging update Nov 28, 2007
- User interface Questions
- Passthrough data logging problems
- PID Availablity problems in passthrough logging mode.
- Beta update due out tomorrow
- BB Logging update Dec 01, 2007
- V2 stuck in reboot after 2.05.10 FW
- How do I look at Logged Data ?
- What file sysrem is present now??? and more!
- Where did all my files go?
- Can't do FS firmware update
- Help, after BB upgrade, can't add VIN license
- Bbl/lly?
- Delay
- BB Logging Update Dec 6, 2007
- Hot keys and LEDs
- Audible alarms
- Finally got my first crack at BBL
- Something wrong with BBL
- EFI Explorer and Time Travel
- BB Logging Update Dec 14, 2007
- BBL - Take Two
- Explorer questions
- Going backwards to go forward?
- BB Logging Update Dec 20, 2007
- Have to restart V2 frequently?
- Upgrade to release of 7.5.1?
- Cherry Mistmas
- New cable type should be setup
- Calling all beta testers.
- LBZ PID Selection
- Noticed Something New (Different) Today
- BB Logging Update Dec 31, 2007
- Sometimes communication hangs
- Error $0185 when copying files
- Bootblock Upgrade????
- Success with Dec 31st Update?
- cant read 2006 lbz allison tcm
- Having trouble with E-Explorer
- 2007 Escalade + BBL
- Cant use v2 control panel on pc
- Dead SD Card
- BBL DTC Recording
- $0311...cant clear DTC's on LLY
- BB Logging Update Jan 07, 2008
- Help Needed.
- V2 black box logging PID
- .EFX Files
- PID list in final Beta and RTM/RTW version?
- All is quiet on the Beta Front...?
- V2 arrow keys
- ABS warning on dash
- Resetting V2 to get comms
- Its been quiet, but we've been hard at work...
- DTC Bug
- Newbie Question
- Blackbox logging update
- 5sp Allison TCM Scan issue
- RAM Error
- AutoVE PID's??
- Can't read or format SD Card
- BB Logging update (March 4th)
- Wideband serial update
- BB Logging update - delayed a day or two
- BB Logging Update
- BB Logging quick reference guide (beta)
- I made a cable for BB Logging
- 3/18/08 What do I need to have to be prepared for the new beta release
- March 20, 2008 Update
- BB Logging beta update: March 20,2008
- 98 Controllers Missing from New Beta Release
- Ok some serious issues
- no controller found
- Engine Oil Pressure PID
- Logging BEN factor with March 20th Beta?
- E67 missing PIDS from new Beta?
- Low power mode and power cycle?
- PID Problem w/BBB - Asked by Cougar 281 (FRPDES problem)
- LLY - No BBL
- $0185 error
- First round of bug fixes
- Tech edge wb use with v2 bbl
- Missing PIDs
- Help truck down after update
- Do Not Flash LMM Trucks
- 6sp Allison
- Flash Scan module acting weird with BBL
- FlashScan button response super sensitive
- License question with 7.5 update for BBL
- E38 BBL Log Files Hang
- BB Logging beta update: March 26, 2008
- I finnally got my first log file!!! But, now I can't see it through the scan tool
- BBL data display/record decimal places
- Error message after attempting to create new PID list
- Error message formatting....
- Dyncylair_m
- Quick question about PID Descriptions...
- Trying to update Flashscan with new BBL firmware.
- No LBZ passthough
- BB logging a drift car
- PLX SM-AFR Serial upgrade
- BBL Status Update April 07
- BB Logging beta update: April 07, 2008
- update help needed asap
- Do Not Do The Custom Os Full Flashes With Latest Release>
- no E67 auto or manaul in vehicle selection
- PID Custom Units (PCU) issue with April 7th Update
- BB read/write?
- Vista and EFILive Explorer $0024
- inlet valve temp - dma pid not working
- Error code $0109 after update
- Boot block upgrade failures - Explanation
- BB Logging beta update: April 14, 2008
- Fixing your Bricked V2
- Out of office
- PSL Logging issue
- Shift Range Inhibited when in reverse.
- Please read before posting bug reports
- Auto Cal out?
- BB Logging beta update: April 26, 2008
- Beta Releases and Log Files Full Of Notes
- Issues logging E38 PIDS
- BB Logging beta update: May 03, 2008
- Allison 6speed Range inhibit after DVT
- SD card logging capacity
- LC-1 serial to FlashScan software?
- BB Logging beta update: May 06, 2008
- Problem Adding New PID Selection List
- i need to got out of beta
- The Good, The Bad, And The Ugly...
- New problem with V2 serial wideband input
- Instructions
- EFI Explorer/How to get options.ini to FlashScan?
- BB Logging beta update: May 12, 2008
- BB ExtAD input to AFR
- Error $0281 on DTC Clear?
- Do I need a PID to LOG serial data?
- Scan doesn't find PCM - but everything else works ...
- wrong firmware and boot block
- BBL/Allison?
- Unable to read DTC's
- BB Logging May 19 Update
- BB Logging beta update: May 19, 2008
- Looking for STFT & other pids
- PID for AutoVE
- FlashScan to LC-1 Serial Cable Diagram
- V2 connectors for external devices
- Race Car Guy V2 Betta BBL NOOB - Help!
- Rookie having trouble scanning PIDs with BB update
- Using inverter for laptop + FS V2 with serial logging
- $0281 error when clearing DTCs - fixed
- Have I damaged my V2?
- Dashboard guages issue
- Status Indicator Definitions
- Monitor names and DTC status flags
- Strange flash counts
- getting an error trying to read bbl on scan tool
- Problems with AEM Uego serial logging....
- Can't open log files anymore...
- P12
- BB logging out of Beta
- AutoCal Beta
- BBL installer update: June 12, 2008
- BBL installer update: June 12, 2008
- Switchable Tunes
- Tune switching from V2 - idea?
- Help flash memory test failed
- V7.5.4 (62) Dash Problem - Help
- Default set of PIDS
- Flashing with Beta V2 and USB 1
- This one is for Ross and Paul
- BBL installer update: June 22, 2008
- Explorer won't connect....
- stuck in dead poll mode
- Latest Firmware and BootBlock?
- SD/MMC toggles on/off while logging.
- Possible BETA Problem
- Need Help w/LC1 Serial Logging
- BBL Step by Step Tutorial ?
- BBL PIDs
- V2 BBL Class2 & GMLAN
- Anyone tried the LM2 already?
- Suggestion for Scan Tool
- getting logged data from v2 to laptop
- Standalone DVT?
- Options.ini not found
- V2 BBL and 1 GB SD card - intermittant
- _DMA/_M PIDs in BBL for E67 AutoVE
- v2 still only logging for a few minutes..
- Bbl Pids?
- Afr spikes in BBL only
- Can't read DTC's
- Flashscan to LM-2 Serial Cable
- WB to V2 Serial Cables
- SD Card Holder - Finiky or defective?
- Scanning - CAN & VPW both connected
- Does current BBL software work OK?
- EFILive 7/.5/8.1 question... where to ask?
- Cannot clear "B" DTC from LBZ with latest update
- BBL PID's for Allison 5 speed
- FlashScan Bootblock Upgrade Failed
- minimum resolution?
- Loggng MAF as Gram/sec. getting Lbs./min in Scan
- LBZ 7.5.4 (build 66) Scan Failure with BBL Beta FW 2.05.20
- LMM Unsupported PID
- cant select pids ini not found error message
- Selecting PIDs
- 9/11/2008 BBL Status
- BB Logging - Missing Data ?
- Missing PIDS from LS1B_M.pmm
- Longer delays with BBL & other changes
- Problems with flashing already licenced controllers
- Is V2 BBL still in beta...?
- Help on upgrading to 8.1
- Dumb question...
- Log playback on V2?
- switching tunes
- Where are the .dtc files...?
- So.. was a new version released this weekend?
- can`t flash (build 72)
- how to retrieve logged bb data?
- BBL and E38 COS Issue
- The Return Of "Access Violation" Errors
- Alerting Feature Request and Question...
- V2 display after selecting a pid list...
- No PIDS or A/F!!
- LC1 to V2
- can this feature be removed?
- Ctrl key self test...
- e38 dma pid SCALEDCORVE_ doesnt work plus a bad calc pid
- selecting pids on v2
- options.txt file
- BB logging pids
- PLX SM-AFR Serial control not found.
- Build 82, WTF?
- How to add my PIDS to BBL?
- Logging E38 Analog PLX AFR
- please explain V7.5 vs. V8.1 BBL
- Possible stand-alone tune downloading
- Thanks!!
- MAIN1Q_M not supported