flash problem

[divette]

Hi.
After updating V2 7.5.5, I on flash ECM E38. Here a photo
Thanks
http://savepic.ru/499165.jpg

[mr.prick]

It`s blurry but i can see it says you need to license the PCM.
Is this the first time flashing this PCM?
Have you used all your licenses?

[divette]

http://savepic.ru/505297.jpg

[GAMEOVER]

I agree like mr. prick asked... Is this your first time flashing this ECM?

[GAMEOVER]

By looking at your firmware, I think you need to update your flashscan firmware, the newest firmware is V2.06.06

[joecar]

divette,

Welcome to the forum...:cheers:

Some questions/comments for you:

1. As asked above, is this the first time you tried flashing this particular ECM...?
It's serial number (which I can't see too clearly) doesn't show up in the used license list.

2. When you do upgrade your V2 bootblock/firmware, see this before proceeding:
Updating FlashScan V2 Firmware:
showthread.php?t=9375 (http://forum.efilive.com/showthread.php?t=9375) post #9 and #10
showthread.php?t=10014 (http://forum.efilive.com/showthread.php?t=10014)
Post #9 also shows how to update to the latest software.

3. Your FlashScan has logged 30 full flashed and 0 cal only flashes...
Why don't you ever do any cal only flashes...?
You need full flashes only if you're changing the OS or a segment;
if you're editing tables/parameters you only need cal only flash.

Cheers
Joe
:cheers:

[divette]

By looking at your firmware, I think you need to update your flashscan firmware, the newest firmware is V2.06.06

Where to take V2.06.06?

[joecar]

Where to take V2.06.06?


showthread.php?t=9375 (http://forum.efilive.com/showthread.php?t=9375) post #9See steps 2 and 4 in post #9 regarding V8.

[divette]

What for it is necessary V8?

[joecar]

V8 is the EFILive Explorer (EE) utility which allows you to upgrade the V2 bootblock/firmware and to read black-box-log files.

[divette]

OK
It is everything that else it is necessary to make?

http://savepic.ru/516584.jpg
30--cal Full--00
http://savepic.ru/517608.jpg

Thanks

[ScarabEpic22]

You need to upgrade the bootblock as well for your V2, go back into the EFILive Explorer->Firmware then click the "..." button. Find the firmware file for FlashScan and flash that in, then reflash the latest firmware.

And have you flashed this ECM before? If you havent, you have to license it as you probably know. If its already licensed, then we'll need to look deeper at this.

[joecar]

cal 30--Full 0


Ah, I see the new firmware has fixed that... :cheers:

Yes go and update teh bootblock as Erik said.

[divette]

All thanks