PDA

View Full Version : Pass through 5 speed Alli scanning issue



Cougar281
March 7th, 2009, 10:06 AM
Just an FYI, pass through seems to have some issues scanning 5 speed Alli controllers. Just got my trans back in, and I was watching the Pressure Control Switches to make sure everything was engaging and reporting right, but in pass through they all acted like they where disconnected. Fortunately, before I dropped the pan to check that I pligged it back in, I noticed that the TFT was at like 68*, which it wouldn't have been if the PSM was unplugged. Checked with BBL, and they where responding right. Jsut FYI; Let me know if I can provide any more useful info.

Blacky
March 8th, 2009, 08:20 AM
Do you mean PIDs: PCS1OS through to PCS5OS?
I've just checked and there is a mistake in those PID's config for pass through logging.
I'm working on a fix now...

If you were referring to any additional PIDs, please let me know.

Regards
Paul

mr.prick
March 8th, 2009, 08:39 AM
What build are you using?

Cougar281
March 8th, 2009, 01:46 PM
Do you mean PIDs: PCS1OS through to PCS5OS?
I've just checked and there is a mistake in those PID's config for pass through logging.
I'm working on a fix now...

If you were referring to any additional PIDs, please let me know.

Regards
Paul

No, Actually I was looking at TState02, although that could be related to the mistake in PCS1OS-PCS5OS since I'd assume it uses those PIDs to determine TSTATE02.


What build are you using?

Latest and greatest; Build 83

Blacky
March 8th, 2009, 02:37 PM
No, Actually I was looking at TState02, although that could be related to the mistake in PCS1OS-PCS5OS since I'd assume it uses those PIDs to determine TSTATE02.

Latest and greatest; Build 83

Be aware that most of the STATE and TSTATE PIDs have had their names changed between V7 pass through logging and FlashScan's Black Box Logging. The name change is automatically handled by the V7 scan tool when it loads a BB log file.

For example, TSTATE02 in V7 pass through logging is now called TSTATE33 in black box logging. so if you logged TSTATE33 using black box logging and then viewed the file using the V7 scan tool it would appear as TSTATE02 in the scan tool.

The complete list of name changes is


# ================================================== ============================
# Conversion of BBL PID names back to V7Parameter names
# ---------------------------------------------------------

*BBLV7

#BBL Name V7 name
#------------- ----------------
; SAE paramaters
WO2AS11 WO2S11_B
WO2AS12 WO2S12_B
WO2AS13 WO2S13_B
WO2AS14 WO2S14_B
WO2AS21 WO2S21_B
WO2AS22 WO2S22_B
WO2AS23 WO2S23_B
WO2AS24 WO2S24_B

; GM Enhanced parameters
ESTDIAG STATE14
ETCTAC1 STATE15
ETCTAC2 STATE16
ETST ETCS
MAF_GM MAF
MAPS MAP
ACHPRS ACP
GENFDC ALT-F
TP_A TP
FRPS FPS
BBVPS BBS
DESTQ DESTRQ
EOP EOPS
EGRCMD EGRCOM
TRACTRQ ACTTRQ
TTQRET SEMRET
BARO_B BARO
EOLIFE EOL
RUNTIME RUN_TIME
MAFSD DYNAIR_LS2
EGRCLOSE EGRPINTLE
IDLERPM IDLRPM
STFTAVG1 SHRTFTAVG1
LTFTAVG1 LONGFTAVG1
STFTAVG2 SHRTFTAVG2
MFFAIL1 MFFAIL
MFPASS1 MFPASS
LTFTAVG2 LONGFTAVG2
FTV FTP
CASE CASEERR
CURRCYL CKREFCYL
FANDC FANPWMDC
GENLDC GENL_DC
IGN1CC IGNCOIL1
IGN2CC IGNCOIL2
IGN3CC IGNCOIL3
IGN4CC IGNCOIL4
IGN5CC IGNCOIL5
IGN6CC IGNCOIL6
IGN7CC IGNCOIL7
IGN8CC IGNCOIL8
INJ1CC INJECTOR1
INJ2CC INJECTOR2
INJ3CC INJECTOR3
INJ4CC INJECTOR4
INJ5CC INJECTOR5
INJ6CC INJECTOR6
INJ7CC INJECTOR7
INJ8CC INJECTOR8
O2H11DC O2HTRDCB1S1
O2H21DC O2HTRDCB2S1
VSFPDC FPVSPDDC
EOT EOILTS
FANSPD_DES FANSPD_ACT
TSTATE33 TSTATE02
TSTATE34 TSTATE03
TSTATE35 TSTATE04
TSTATE36 TSTATE05
TSTATE37 TSTATE06
TSTATE39 TSTATE07
TSTATE40 TSTATE08
TSTATE41 TSTATE09
TSTATE42 TSTATE10
TSTATE45 TSTATE12
TSTATE03 TSTATE13
TSTATE04 TSTATE14
TSTATE05 TSTATE15
TSTATE06 TSTATE16
TSTATE07 TSTATE17
TSTATE16 TSTATE18

TSTATE02 TSTATE52
TSTATE08 TSTATE58
TSTATE09 TSTATE59
TSTATE10 TSTATE60
TSTATE11 TSTATE61
TSTATE14 TSTATE64
TSTATE15 TSTATE65
TSTATE17 TSTATE67
TSTATE19 TSTATE69

TCMPSLIP TCSLIP

Cougar281
March 8th, 2009, 02:54 PM
Right, I was logging TSTATE02 in the scan tool (didn't report anything), and was actually looking at TSTATE03 on the V2 (reported changes).

Is there a complete list of the PIDS available yet? The version os the "PID Descriptions" I have for the 5 speed Allison doesn't have anywhere near as many PIDS as you just posted (Of the TSTATE PIDs, it only has 01, 03, 04, 05, 06, 07 & 16).

Dave


Be aware that most of the STATE and TSTATE PIDs have had their names changed between V7 pass through logging and FlashScan's Black Box Logging. The name change is automatically handled by the V7 scan tool when it loads a BB log file.

For example, TSTATE02 in V7 pass through logging is now called TSTATE33 in black box logging. so if you logged TSTATE33 using black box logging and then viewed the file using the V7 scan tool it would appear as TSTATE02 in the scan tool.

The complete list of name changes is

Blacky
March 13th, 2009, 08:10 AM
The AutoCal beta release (due out Monday) will have all the PIDs updated.
Regards
Paul