PDA

View Full Version : Scripting help and OS



bdr2008
March 11th, 2009, 07:28 AM
Here is what I am doing. I am tuning my second truck 01 lb7. I down loaded a tune from DP. The OS is differant so I downloaded a stock tune with the same OS then ran a script. Then ran that script over my stock tune that has a differant OS. Is this right or am I going to cause problems because of the cal.? numbers being differant. I think I did it right but need to be sure.. I AM LEARNING AS FAST AS I CAN GUYS. just an old wrench guy:help2:

mr.prick
March 11th, 2009, 08:40 AM
EFI Scripts? (http://forum.efilive.com/showthread.php?t=10173&highlight=post)
Post #3 (http://forum.efilive.com/showpost.php?p=89043&postcount=3)

bdr2008
March 11th, 2009, 09:10 AM
That does not explain if the cal. numbers have to match or it does and I don't understand. Am I right or wrong with the way I did it??????????

mr.prick
March 11th, 2009, 09:51 AM
The trick is that this comparison must be made between like operating systems. This simple file holds all of the information on how 'X-O.S./A-.cal' can be converted to 'X-O.S./B-.cal', or why the modified tune runs differently than the stock tune.

Did the script run or did you get an error?

bdr2008
March 11th, 2009, 09:59 AM
The script run all the way but did have an error. Something about the fuel gauge.

mr.prick
March 11th, 2009, 10:59 AM
As long as everything was changed the way you wanted it to, you will be fine.