PDA

View Full Version : My cars not going into closed loop



dmoss69
March 11th, 2009, 07:33 AM
My car's not going into closed loop, and here's my log.

2000 camaro, ls1, tunercat w/ roadrunner to program, just swapped over from mx scan to efi live scanning software, and learning slowly.

Am I logging the right PID for closed loop indication?

Thanks

SOMhaveit
March 11th, 2009, 08:11 AM
Noone can tell by looking at a log. You need to post up your tune.

dmoss69
March 11th, 2009, 08:41 AM
you wouldn't be able to tell if this is the right PID for the log?

SOMhaveit
March 11th, 2009, 09:17 AM
PID's don't determine whether or not you go into closed loop. The log says you are in open loop with etc almost 220 degrees. Unless you have one of your parameters off in the tune, you should be in closed loop at that point.

dmoss69
March 11th, 2009, 10:59 AM
that's what I was thinking.


I'll get another scanner and make sure it's saying it's not in closed loop. I know on efi live it has sae and gm/alkdjoapijew measures, that's what I was making sure that this was a true PID.

It changes from OL to DRIVE-OL.

joecar
March 11th, 2009, 02:43 PM
dmoss69, welcome to the forum.

It is not going to CL, it's running hot as SOMhaveit said, and the HO2Sx1 voltages say it's running rich.