My cars not going into closed loop

[dmoss69]

My car's not going into closed loop, and here's my log.

2000 camaro, ls1, tunercat w/ roadrunner to program, just swapped over from mx scan to efi live scanning software, and learning slowly.

Am I logging the right PID for closed loop indication?

Thanks

[SOMhaveit]

Noone can tell by looking at a log. You need to post up your tune.

[dmoss69]

you wouldn't be able to tell if this is the right PID for the log?

[SOMhaveit]

PID's don't determine whether or not you go into closed loop. The log says you are in open loop with etc almost 220 degrees. Unless you have one of your parameters off in the tune, you should be in closed loop at that point.

[dmoss69]

that's what I was thinking.


I'll get another scanner and make sure it's saying it's not in closed loop. I know on efi live it has sae and gm/alkdjoapijew measures, that's what I was making sure that this was a true PID.

It changes from OL to DRIVE-OL.

[joecar]

dmoss69, welcome to the forum.

It is not going to CL, it's running hot as SOMhaveit said, and the HO2Sx1 voltages say it's running rich.