VE log reads 0.00

[nchristian]

new to efi live. Im doing wideband VE tune. read the tur. Im using the LM 1 wideband set up. going to attach log. please help.

[nchristian]

I dont think the lm 1 is not loging the data to efi live. dont know if i have the wrong PIDS selected.

[5.7ute]

How have you got the lm1 hooked up to Efilive? Serial connection or analog (using the orange connectors)?

[mr.prick]

Have you programmed the analog out from the LM1 to match the PID?
Are you using V1 or V2?

I have had some strange things happen before with a PID stuck at 0.0,
a reboot of the software cures this.

[nchristian]

im using the serial cable form taq

[nchristian]

do i have the correct PIDS selected to run the lm 1. the V2 reads the afr.but I cant see it in the data list. but not sure.

[mr.prick]

Then you need the serial PIDS:
CALC.BEN1
EXT.WO2AFR1
EXT.WO2LAM1
EXT.WO2ST1
And make sure the V2 is set for the Innovate WBO2.

[5.7ute]

Then you need the serial PIDS:
CALC.BEN1
EXT.WO2AFR1
EXT.WO2LAM1
EXT.WO2ST1
And make sure the V2 is set for the Innovate WBO2.


X2
Also you may need to manually validate the pids. Connect to the PCM with the laptop connected to the V2. Under the info tab is the validate pids command.

[nchristian]

OK I tried all of the above.it still will not log the BEN. it counts on and when u view the average it reads0.00

[5.7ute]

OK I tried all of the above.it still will not log the BEN. it counts on and when u view the average it reads0.00

Log File???

[mr.prick]

What build of the software are you using?
The newest version is in my sig.
Build 81 & 82 had bugs that screwed up serial WBO2.

[nchristian]

yes in the log file. IM tring the do a auto ve. and it just not working on me.I know somthing easy that is looking me in the face. I have add he new pids. but im get the same results. does supose to read about 1.00 correct

[nchristian]

I have the lastest updates in both of the efi live progs.

[5.7ute]

Sorry, I meant for you to post the last log file that it still wasnt reading in. That way we can verify the last steps.

[nchristian]

here is the last log file

[5.7ute]

here is the last log file

That log shows everything working now. I would say you are viewing the wrong map. Edit the map to use CALC.BEN1 as the data.

[nchristian]

thanks guys that worked. I hope one day that i can help you out one day.

[5.7ute]

Also I believe you are either logging the wrong TP pid or you are seriously in need of a TPS reset.

[nchristian]

it is a ETC. It is a 04 silverado that it put a 6.0l.so you think the tp is wrong

[5.7ute]

Yes, I am pretty sure there is a different pid to log when tuning an ETC equipped vehicle. I havent had much to do with them so I am not sure which one you should log. A quick search on this forum should set you right.

[5.7ute]

Take a look here. http://forum.efilive.com/showthread.php?t=9749&highlight=pid