Newbee Help!!!!!

[mijdirtyjeep]

Trying to save my factory info for the first time, and get this: Any clue as to why??


17:49:47.984: Scanning for EFILive FlashScan V2 USB
17:49:50.500: Scanning for EFILive FlashScan V2 HAPI
17:49:50.703: Interface firmware version: 2.6.6
17:49:50.734: Interface firmware model: FSV2
17:49:50.750: Interface firmware version: 2.6.6
17:49:50.765: Interface firmware date: Dec 14, 2008
17:49:50.796: FlashScan serial number: 003736168831
17:49:50.812: FlashScan license number: 003736168831
17:49:50.828: Disconnecting ...
17:49:51.203: CAN-VPW Bridge Deactived
17:49:51.203: Disconnected
17:49:51.890: Scanning for EFILive FlashScan V2 USB
17:49:54.406: Scanning for EFILive FlashScan V2 HAPI
17:49:54.609: Interface firmware version: 2.6.6
17:49:54.625: CAN-VPW Bridge Actived
17:49:54.656: Current protocol set to: "SAE J1850 VPW"
17:49:54.765: Current protocol: "SAE J1850 VPW"
17:49:54.796: Interface firmware model: FSV2
17:49:54.828: Interface firmware version: 2.6.6
17:49:54.843: Interface firmware date: Dec 14, 2008
17:49:54.859: FlashScan serial number: 003736168831
17:49:54.875: FlashScan license number: 003736168831
17:49:54.984: Getting status...
17:49:55.031: Status: OK.
17:49:55.875: Bootloader version: DLB7_v1.3R (0496-61DA)
17:49:55.875: Preparing ECM for reading flash...
17:49:55.906: ECM reports "Not secured!"
17:49:55.906: Initializing ECM...
17:49:56.718: Initializing ECM, step 1 of 4
17:49:56.718: Initializing ECM, step 2 of 4
17:49:57.515: Initializing ECM, step 3 of 4
17:49:59.062: Initializing ECM, step 4 of 4
17:49:59.343: ECM lock has been re-armed, attempting to unlock ECM again...

17:49:59.375: ECM reports "Not secured!"
17:49:59.375: Initializing ECM...
17:50:00.156: Initializing ECM, step 1 of 4
17:50:00.156: Initializing ECM, step 2 of 4
17:50:01.687: Initializing ECM, step 3 of 4
17:50:03.234: Initializing ECM, step 4 of 4
17:50:03.515: ECM lock has been re-armed, attempting to unlock ECM again...

17:50:03.671: Initializing bootloader...
17:50:03.750: Error: Failed. Controller has returned to normal operation, please retry the operation.
17:50:04.015: Initializing bootloader, step 1 of 3
17:50:04.015: Error
17:50:04.015: Disconnecting ...
17:50:04.671: CAN-VPW Bridge Deactived
17:50:04.671: Disconnected
17:50:13.750: Done!

[Blacky]

I can't tell what version of the V7 software you are using from that trace. But that was a problem in an earlier version of V7. Make sure you have the latest V7.5.5 software. And that you have done the Check for New Updates to get the most recent updates.

Regards
Paul

[mijdirtyjeep]

Ya just checked, and it is 7.5.5 (build72)

[ScarabEpic22]

Thats not even close to the latest build man, its the latest main download but after you install it you need to go Program Files->EFILive->V7.5->Tools->Check for Updates and run that. Then you'll get build 83 downloaded, retry it then.:grin:

[Blacky]

Ya just checked, and it is 7.5.5 (build72)
You should use the "Check for new update" option to update to build 83. There's been a lot of fixes between 72 and 83.
To do that, select the Windows Start menu:
Start->All Programs->EFILive->V7.5->Tools->Check for New Update

(ok so I'm about 2 hours late with that reply - thanks Erik)

Regards
Paul

[mijdirtyjeep]

Thanks guys!!! Went out and tried it with the Alt key checked, and the high speed unchecked, and that worked. It was late so I went to bed. I downloaded the newest version today.

Again thanks
Jim

[ScarabEpic22]

Good luck with your Dmax Jim, I drove a bunch of them last summer and really want one someday! 650+ tq would be sweet for towing.