View Full Version : Code C0561
fastsccaguy
March 30th, 2009, 07:44 AM
After tuning, it throws a C0561 code "System Disabled Information Stored EBCM" If I flash the stock tune back in, it does not do it. Obviously, there is a correlation there. I'm not sure what is causing it in the .tun file. Anyone run into this before?
2005 with an E40 ECU
Thanks in advance
GMPX
March 30th, 2009, 10:54 AM
Sorry, no idea on that one.
eboggs_jkvl
March 30th, 2009, 12:31 PM
The best I can do is this. Look near the bottom of the first post.
http://www.ls2.com/forums/showthread.php?postid=2860923#post2860923
Elmer
fastsccaguy
March 30th, 2009, 12:57 PM
Thanks for the replies all.
I ended up going through the differences one by one. (Long and tedious!!) It is directly correlated to the high frequency fail on the MAF. I had it set to 0. The stock # is 13500. I did not turn off the reporting parameter for it. I will try turning it off tomorrow with the high freq. at 0.
Elmer, that sheds more light on it for sure!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.