Loping Diesel

[1Badmax]

I have a question for anyone with an answer!!!! I have a 2004.5 LLY with edge's juice with attitude monitor and water injection i want my truck to lope so it sounds meaner than it really is how can i accomplish this

[LBZoom]

I don't know if you can make the LLY or LBZ trucks do it...the LB7's can because they have a throttle base injection quantity table, which is where the change is made... I have an LBZ and i'm totally bummed...haha

[1Badmax]

I know that it is possible.... I have listened to it on you tube and it sounds awesome

[LBZoom]

Yeah I've listened to them too...but I think some of those guys don't actually know what engine they have...I've kinda got mine to lope through Pulse tables but nothing like the LB7's, unless someone can prove me wrong about the LLY's and LBZ's

[Nemo]

Yeah I've listened to them too...but I think some of those guys don't actually know what engine they have...I've kinda got mine to lope through Pulse tables but nothing like the LB7's, unless someone can prove me wrong about the LLY's and LBZ's

A friend of mine acually has his LBZ lope(Video below) it doesnt sound like it lopes very hard in the video but in person the whole truck shakes and it gets some attention and "WTF do you have done to that truck" LMFAO, We both have been working on doing it to my LLY. ;)

http://www.youtube.com/watch?v=4BMSMApMX90&feature=channel_page

-Nemo

[LBZoom]

Sweet! haha. I kinda worked on one for my LBZ and it worked okay and then I abandoned the idea to work on my other tunes....If you don't mind me asking,did he do it via pulse width tables?

[1Badmax]

I see well if anyone knows for sure please let me know and thanks for the info

[LBZoom]

Wait a second... I bet it can be done through the torque based fuel table...I never thought about that. I'll try it and let ya know

[beach_33]

the lb7's and the lly's have throttle base injection quantity tables. this is where the change is made on the first two generations. i dont know where it is at on the lbz's and lmm. also this can not be done without efi. so you will have to get rid of the edge

[Nemo]

Here is a video of my LLY lope idle... sorry the sound is bad quality, i took the video with my cell phone...

http://www.youtube.com/watch?v=Nws4L09s_-o&feature=channel_page

-Nemo

[Nemo]

Forgot I already posted this one...

-Nemo

[1Badmax]

ok well thanks for all the info it was really helpful

[bnowlin001]

Change your throttle based injection value to around 30 at 0% and idle rpm. I believe this is how I accomplished this IIRC.

[dansdieselp]

In your throttle based injection table at 600 rpm and 0% tp. Change that cell to 32 or 34 or whatever number you feel is right. Then go into your main injection pulse table and highlight cells 3-20 under 30-40mpa. Then add 100%. This will make her lope really good. Play with it a little until it is were you want it. If it is to hard, then decrease that one TBI cell.


Dan

[numberoneshooter]

Here is a video of my LLY lope idle... sorry the sound is bad quality, i took the video with my cell phone...

http://www.youtube.com/watch?v=Nws4L09s_-o&feature=channel_page

-Nemo

nemo if you dont mind could i get that tune for my lly :rockon:

[Nemo]

nemo if you dont mind could i get that tune for my lly :rockon:

I PM'd you back...

-Nemo

[cumminsDK]

hey guys i have a lly that lopes pretty hard. Go to throttle based injection quantity and at 0% throttle in the 600 and 800 rpm columns enter 42. also i used imperial units. the higher this number the harder the lope.

[speedygoss]

http://www.youtube.com/watch?v=ktF3MlgrxY8

[04duramaxzf6]

http://www.youtube.com/watch?v=F9iPRIOXRTo



2004 gmc sierra 2500hd lly zf6... southbend clutch ... fass fuel system

[Devil_Z]

I PM'd you back...

-Nemo

For whatever reason I couldn't pm you.. Anyway, could you also email me that LLY lope tune? I'd appreciate it.

Thanks,
Brett

[ippielb]

http://www.youtube.com/watch?v=ZTeC3MNDLDY
http://www.youtube.com/watch?v=7BZUE_MLUWk&NR=1