PDA

View Full Version : Dying Problem



OrangeFlash05
April 14th, 2009, 02:31 AM
Just wanted to post up and see if i could get some help on my truck dying. I just recently installed a G5x2 cam. We converted over to speed denisity tunning. Now that we did that my truck will randomly die after coming to a stop. It goes into reduced engine power and then dies and will not start back up. I have to reflash the tune into the truck for it to crank back up. I have posted a few attachments one being the tune, and the other 2 are when the car dies. It seems to only do it when the car is in gear...if I let it idle in park it will run forever, but I even tried putting the emergency brake on and let it idle in gear and it would die every time.

limited cv8r
April 14th, 2009, 01:59 PM
More info please. What type of vehicle/Eng size/Cable or ETC throttle, cam specs.What is the history of the tune in the vehicle now?

exploder
April 15th, 2009, 02:20 AM
Truck is an 05 chevy 1/2 with a 5.3 and a ETC throttle. Cam specs are in the 230s...LG motorosports g5x2. I have been trying to help him with the tune, but I am not that great. A few things of note

1. Tuned in SD
2. He left the MAF plugged in and it had none of these problems other than it not running that great....we unplugged the maf and retuned it because it was asking for alot more fuel and that is when the car started dying in gear.
3. If you plug the maf back in it will not die.