PID Conversion Required

[boyley]

Guys I have read umpteen threads regarding changing PIDs for BBL but am bambooseld by it all.

If you dont mind can someone tell me how to put these PIDs in my V2. Its already setup for BBL but I need to modify the PIDS in E38 Auto F2.

Heres what I want in there

[Parameters]
CALC.AFR_PLX1=1,4216
CALC.BEN_PLX1_E38=1,4272
E38.AFRATIO_DMA=1,-1
E38.APCYL_DMA=1,-1
E38.ESTCATDEG_DMA=1,4335
E38.INVLVTMP_DMA=1,4338
EXT.AD1=1,4376
GM.INJPWB1=1,4647
GM.KR=1,-1
GM.TFT=1,4938
GM.TRQTRANS=1,4857
SAE.ECT=1,-1
SAE.IAT=1,-1
SAE.MAP=1,-1
SAE.O2S11=1,5059
SAE.RPM=1,-1
SAE.SPARKADV=1,-1
SAE.TP=1,5080
SAE.VSS=1,-1

[mr.prick]

Read the PID description.txt for your PCM in
C:\Program Files\EFILive\V8\Documents\Pid Descriptions

Example:
99+ LS1 manual trans = LS1B_M_PIDs

IAT = [1] Intake Air Temperature (°C)
MAF = [2] Mass Air Flow (g/s)
RPM = [2] Engine RPM (rpm)

Copy the Pid Description to the options.txt
Example:
PCM, IAT
PCM, MAF
PCM, RPM

[joecar]

What vehicle/year/model...?

Post your Options.txt file, we'll edit it.

[boyley]

If you wouldnt mind Joecar then I can compare the two fo future reference. Mucho Gratis

I take it I just drop the updated file back into the config files tab??

[joecar]

If you wouldnt mind Joecar then I can compare the two fo future reference. Mucho Gratis

I take it I just drop the updated file back into the config files tab??That is correct...

Try attached file and let me know if it works or not (look at PSL_24).

To get the wideband AFR, you have to press ENTER while logging.

BEN can't be done yet.

I don't have an E38 or T43... anyone is quite welcome to test this file out.