View Full Version : need help
firebladews6
May 9th, 2009, 10:29 AM
i have a iron block 408 with t/f 215 11.8 compression 244/245 650/650 112 lobe sep,42 pound injectors with 61 psi feul pressure. it also has 1 7/8 headers. can anyone please help me with a base tune so i can start this bad m/f. thanx in advance. email it to fireblade@bellsouth.net i hope this is in the right section. if you need any more info let me know.
odd boy
May 9th, 2009, 04:00 PM
what ECU, car, trans....etc
firebladews6
May 9th, 2009, 11:24 PM
what ECU, car, trans....etc
stock ecu 2000 t/a turbo 350
odd boy
May 9th, 2009, 11:58 PM
what boost, maf or mafless, stock maf??
firebladews6
May 10th, 2009, 12:06 AM
what boost, maf or mafless, stock maf??
no boost 85mm slp maf n/w90,fast90.set up for alot nos. in the future two kits 200/100 with a stand alone fuel cell
odd boy
May 10th, 2009, 12:28 AM
use this MAF Sensor Calibration (Grams/Second). then tell me how it goes
you need to do the injector size, change the idle speed and air flow.
5345
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.