pullincrazy88
May 9th, 2009, 10:58 AM
when i start the truck it wants to fall on its face and die. you have to hit the throttle a time or two before it will catch idle. but if its been running and you shut it off and restart right away its fine. ive looked at the tutorial posted about starting issues but my stupid "black box" doesnt have any of the tables hes talking about tweaking.
i set my IAC correction tables for too low higher and it seemes to help a little bit. but just seems like it takes the pcm to long to realize its to low and kick it up. i did this and got it down to only having to hit the throttle once before it will grab and idle, but still stumbles a little before it come up and catch idle. any ideas
i set my IAC correction tables for too low higher and it seemes to help a little bit. but just seems like it takes the pcm to long to realize its to low and kick it up. i did this and got it down to only having to hit the throttle once before it will grab and idle, but still stumbles a little before it come up and catch idle. any ideas