check out my log

[JOHNGEAR]

a new log to look at5417

[alwaysinboost]

just my observation but whats wrong with your inj duty cycle? it goes over 300%

your IATs are pretty high, are you running an IC?

[JOHNGEAR]

still using the stock injectors(19#) with 12# pulley,just can't get the fuel so i am learning hands on you could say with this testing motor.
not as of yet but as soon as the new mill is installed, it will be complete including an inter-cooler
the new mill will be using 38# or 48# injectors,holley stealth ram,383 cubes and much more
will keep all informed on build and have many ?s on injector set up
thanks

[joecar]

Maybe your IFR and VE tables are both incorrect...

[alwaysinboost]

just remember don't skimp on the fuel, thats where all the power comes from. All the SC does is give your motor the air needed to burn that extra fuel.

[JOHNGEAR]

i have not completed a auto ve so the one that i am using is one i built.
i do belive that it is incorrect but it does seem to keep the truck happy (not knocking hard) for now.