PDA

View Full Version : check out my log



JOHNGEAR
May 19th, 2009, 11:59 AM
a new log to look at5417

alwaysinboost
June 21st, 2009, 04:53 AM
just my observation but whats wrong with your inj duty cycle? it goes over 300%

your IATs are pretty high, are you running an IC?

JOHNGEAR
June 21st, 2009, 06:56 AM
still using the stock injectors(19#) with 12# pulley,just can't get the fuel so i am learning hands on you could say with this testing motor.
not as of yet but as soon as the new mill is installed, it will be complete including an inter-cooler
the new mill will be using 38# or 48# injectors,holley stealth ram,383 cubes and much more
will keep all informed on build and have many ?s on injector set up
thanks

joecar
June 21st, 2009, 07:50 AM
Maybe your IFR and VE tables are both incorrect...

alwaysinboost
June 21st, 2009, 09:59 AM
just remember don't skimp on the fuel, thats where all the power comes from. All the SC does is give your motor the air needed to burn that extra fuel.

JOHNGEAR
June 21st, 2009, 12:17 PM
i have not completed a auto ve so the one that i am using is one i built.
i do belive that it is incorrect but it does seem to keep the truck happy (not knocking hard) for now.