PDA

View Full Version : Need info regarding 2005 AUTO LS2 VETTE


TFZ_Z06
May 21st, 2009, 02:01 PM
Can I datalog and/or BBL this car w/my dlogger and can I read the bin if its not locked? I've got a V2 FlashScan and 02 Z06. I do have one open license in the V2, but didn't want to use it unless I had to.
joecar
May 22nd, 2009, 02:08 AM
Yes, you can scan/log/bbl and read the bin (which does not use any licenses).

A license is used only if you flash.

There is new V2 BBL software/firmware undergoing beta test... see here:
http://forum.efilive.com/showthread.php?t=10881
Bruce Melton
May 22nd, 2009, 04:14 AM
You will need to ID the PCM as a E-40.

It will be much more invloved to BBL than use default V2 LS2 pids and Vdash.
IMO,
Bruce
TFZ_Z06
May 22nd, 2009, 04:18 PM
thanks Joecar.

Bruce, would you mind elaborating on the BBL difficulty. I had planned to simply run a log on a friend's 2005 and inspect the tuning.
joecar
May 23rd, 2009, 05:52 AM
You would have to do this:
- download and install both V7.5 and V8.1 from here: EFILive download software page (http://www.efilive.com/index.php?option=com_content&view=article&id=48&Itemid=133);
- then carefully read and understand the attached document;
- if you understand the attached document, then upgrade your V2 bootblock/firmware;
- look at this thread from post #210 onward to get an idea how to do BBL: showthread.php?t=9265 (http://forum.efilive.com/showthread.php?t=9265)

V2 BBL is still undergoing beta test (this is a warning) so you may or may not want to wait a bit longer.
Bruce Melton
May 23rd, 2009, 05:55 AM
thanks Joecar.

Bruce, would you mind elaborating on the BBL difficulty. I had planned to simply run a log on a friend's 2005 and inspect the tuning.


JCar may feel differently, but you may have some issues "simply" settiing up BBL for an E40.
joecar
May 23rd, 2009, 06:25 AM
Bruce is correct about E40... I was showing the process required to arrive at BBL, but in doing so I forgot that E40 pids don't show up.
TFZ_Z06
May 23rd, 2009, 07:32 AM
Bruce is correct about E40... I was showing the process required to arrive at BBL, but in doing so I forgot that E40 pids don't show up.

thanks, I've had BBL for some time now. I'm guessing the EFI scanning software will work even if the BBL doesn't (show PIDs)?
joecar
May 24th, 2009, 08:20 AM
Yes, passthru scanning/logging will work just fine.