PDA

View Full Version : firmware latest??



TFZ_Z06
May 27th, 2009, 10:48 AM
Is this the latest firmware 5/23/09?

Also, has anyone tested it? I am curious if I am now safe to use my
SERIAL wideband w/the V2 now. I've got a race on 6/7/09, new head work/cam/exhaust, and want to make sure the tuning equip is good to go!!
Note, I don't use the AD channels.

I sure wish someone would create a sticky on the current updates regarding firmware issues. The threads are scattered though have given a lot of info.

mr.prick
May 27th, 2009, 11:14 AM
The latest that I know of is in my sig and it works fine with RTACS and BBL
I think for the most part people where having issue with the new software, efilive scan and tune, EE not scan.exe, tune.exe
One guy was worried about the self tests but I reproduced what he was seeing and
have been using RTACS and I logged BBL after without issue.

The issues I had were with the AD's and EE would not
format or copy the .pmm's to the V2.
The firmware fixed the AD issue.
No other problems surfaced for me.

I imagine a new updated will be out soon.
We may need beta beta testers. :hihi:

TFZ_Z06
May 27th, 2009, 11:22 AM
The latest that I know of is in my sig and it works fine with RTACS and BBL
I think for the most part people where having issue with the new software, efilive scan and tune, EE not scan.exe, tune.exe
One guy was worried about the self tests but I reproduced what he was seeing and
have been using RTACS and I logged BBL after without issue.

The issues I had were with the AD's and EE would not
format or copy the .pmm's to the V2.
The firmware fixed the AD issue.
No other problems surfaced for me.

I imagine a new updated will be out soon.
We may need beta beta testers. :hihi:

I think the V2 is "possessed"...:notacrook:

thanks for the info...

Highlander
May 29th, 2009, 06:14 AM
it always gets worse before it gets better....

The latest .10 works flawlessly for me, except i do not get serial data if my lm1 is connected to an external power source (other than the car the v2 is connected to).
Either there is too much voltage as I get 14v from the A/C adapter or I don't know....

It does screw with the heater calibration though.