Calculated PIDs not loading with BBL files

[kp]

No matter what I do, even if I load a PID file with injector DC and another calculated PID using the ACPS for boost I have to manually select those calculated PIDs every time I load a BBL file. If I just start EFIlive the calculated PIDs are selected, but if I load the BBL file they go away and I have to manually select them each time I load a BBL file. Kind of a PITA at times..

I seem to rememebr the same thing happeneing with V1 BBL and there was a way to keep them selected when loading BBL files, or maybe not..

[joecar]

After selecting those calc pids and replotting the chart, save the log (overwriting the log file)...

When you next open that same log file, those calc pids will be present.

[kp]

After selecting those calc pids and replotting the chart, save the log (overwriting the log file)...

When you next open that same log file, those calc pids will be present.

I know I can do that, but its kind of a pain when I'm sitting in the car in the staging lanes after a pass with new log files having to select the calculated stuff every time.

I could have swore I didnt have to do that with the V1 BBL.

[Blacky]

Yes, you are right that if the calc PIDs were selected for V1 then they would stay selected. We need to implement something similar for V2 BBL.

Thanks for the heads-up.

Regards
Paul

[kp]

Yes, you are right that if the calc PIDs were selected for V1 then they would stay selected. We need to implement something similar for V2 BBL.

Thanks for the heads-up.

Regards
Paul

I thought the calculated stuff loaded with the V1, been a while though so I wasnt 100 % sure.

Thanks Paul.