LB7 to LBZ CP3 swap tune adjust

[jstrese]

We changed out the CP3 off the LB7 and put on a LBZ pump today and need to adjust the tune for it. Any help would be great.

[02bigstrokin]

you have to change table b1010. voltage is different form lbz's to lb7's

[sweetdiesel]

Set up a pid file showing regulator current des and actual
Adjust b1010 accordingly to get them to match

[blewgrassmotorsports]

Any updated info on this?

[dansdieselp]

Easy way to make the adjustment is to add 10% to the rail regulator current table B1010. Then log your actual vs desired rail pressure and adjust if needed.