98 PCM for Z28

[87gmc]

So how far along did the software get for the 98/97 year models. Will we be able to tune this computers?

Chris

[wait4me]

i have a list of all hex locations for everything, would this help the cause?

[Brains]

Indeed, it will definitely help a lot.. Can you get me a copy? We're about to start putting together the 98 cal ...

[wait4me]

i have it all scibbled out on paper, just give me a form and ill complete all the hex locations for that perameter. .

[Brains]

Whatever is easiest for you. I'd take it in Excel or raw text file if you want to send it that way. As of this second, I don't have a specific format for you to put the data in. I'd kinda feel guilty burdoning you to put it in a specific format anyway :) Heck if you don't feel like keying everything, take a scan or good resolution digital cam pic of the sheet and email it to me.. I'd be happy to do the grunt work.

[wait4me]

ok, ill go threw it all and make a text file, will this be spelled out enough or do i need to go in depth and set up all the boundrys?
operating system 9375577

idle speed vs coolant temp in gear ac on, off in neutral ac on and off
offset 464354 to 464482


and also verify if this is correct so i am not wasting your time and mine,

[Brains]

That's perfectly fine, I can figure out the axis and scale pretty well when it comes time to put it in the calibration file..

BTW - Thanks in advance for the help, from all of us '98 guys 8)

[wait4me]

is that offset information correct? im just making sure, i have the whole pcm output for every os and just about every year and make of car. yes i was bored.

[87gmc]

Thanks from a 98 guy here

[87gmc]

Any progress on the 97/98 pcm?

[wait4me]

not that im aware of, i am going to set up the whole year, but they havent really gotten back with me....

[GMPX]

not that im aware of, i am going to set up the whole year, but they havent really gotten back with me....

Sorry, not enough hours in the day......will get back to you via Email now.

Cheers,
Ross

[wait4me]

first and main table group has been sent. just hope its still the same.. this was from a couple years back..

[GMPX]

Looking good guys.....things should start to ramp up a bit now. :)

Cheers,
Ross

[Black LS1 T/A]

is that offset information correct? im just making sure, i have the whole pcm output for every os and just about every year and make of car. yes i was bored.

Thank you, thank you! (from another '98 PC guy) :)

Can I get this info from you as well?

Michael

[87gmc]

So how are things looking?

[JxxxOxxxE]

any 98' news?

[ViciousVette]

any news for '97/98 C5's too?

[Blacky]

The latest beta version of EFILive contains the code to read and write 98 bin files. And the the ability to configure a calibration definition file.
A 98 forum has been set up (not public yet) which will be used to gather information to build the98 calibration definition files.

Lastly we need to write the bootloaders so that you can actually read/write the bin files from/to your PCM.

It could be as early as March, it could be as late as May.

Regards
Paul

[JxxxOxxxE]

if the 98' forum is not public, is there any way I can contribute to the progress?

[87gmc]

The latest beta version of EFILive contains the code to read and write 98 bin files. And the the ability to configure a calibration definition file.
A 98 forum has been set up (not public yet) which will be used to gather information to build the98 calibration definition files.

Lastly we need to write the bootloaders so that you can actually read/write the bin files from/to your PCM.

It could be as early as March, it could be as late as May.

Regards
Paul

Well if its march i can wait but if its may :shock: Paul if you can keep us up semi up to date. If you honestly feel it wont be till may I may have to a mail tune temporary :cry: