PDA

View Full Version : 98 PCM for Z28



87gmc
January 3rd, 2005, 08:01 AM
So how far along did the software get for the 98/97 year models. Will we be able to tune this computers?

Chris

wait4me
January 3rd, 2005, 09:30 AM
i have a list of all hex locations for everything, would this help the cause?

Brains
January 3rd, 2005, 10:00 AM
Indeed, it will definitely help a lot.. Can you get me a copy? We're about to start putting together the 98 cal ...

wait4me
January 3rd, 2005, 10:17 AM
i have it all scibbled out on paper, just give me a form and ill complete all the hex locations for that perameter. .

Brains
January 3rd, 2005, 10:20 AM
Whatever is easiest for you. I'd take it in Excel or raw text file if you want to send it that way. As of this second, I don't have a specific format for you to put the data in. I'd kinda feel guilty burdoning you to put it in a specific format anyway :) Heck if you don't feel like keying everything, take a scan or good resolution digital cam pic of the sheet and email it to me.. I'd be happy to do the grunt work.

wait4me
January 3rd, 2005, 10:48 AM
ok, ill go threw it all and make a text file, will this be spelled out enough or do i need to go in depth and set up all the boundrys?
operating system 9375577

idle speed vs coolant temp in gear ac on, off in neutral ac on and off
offset 464354 to 464482


and also verify if this is correct so i am not wasting your time and mine,

Brains
January 3rd, 2005, 10:52 AM
That's perfectly fine, I can figure out the axis and scale pretty well when it comes time to put it in the calibration file..

BTW - Thanks in advance for the help, from all of us '98 guys 8)

wait4me
January 3rd, 2005, 10:55 AM
is that offset information correct? im just making sure, i have the whole pcm output for every os and just about every year and make of car. yes i was bored.

87gmc
January 3rd, 2005, 02:22 PM
Thanks from a 98 guy here

87gmc
January 11th, 2005, 09:38 AM
Any progress on the 97/98 pcm?

wait4me
January 11th, 2005, 11:04 AM
not that im aware of, i am going to set up the whole year, but they havent really gotten back with me....

GMPX
January 11th, 2005, 12:57 PM
not that im aware of, i am going to set up the whole year, but they havent really gotten back with me....

Sorry, not enough hours in the day......will get back to you via Email now.

Cheers,
Ross

wait4me
January 11th, 2005, 04:09 PM
first and main table group has been sent. just hope its still the same.. this was from a couple years back..

GMPX
January 12th, 2005, 12:19 AM
Looking good guys.....things should start to ramp up a bit now. :)

Cheers,
Ross

Black LS1 T/A
January 24th, 2005, 08:44 AM
is that offset information correct? im just making sure, i have the whole pcm output for every os and just about every year and make of car. yes i was bored.

Thank you, thank you! (from another '98 PC guy) :)

Can I get this info from you as well?

Michael

87gmc
January 31st, 2005, 04:53 PM
So how are things looking?

JxxxOxxxE
February 13th, 2005, 08:39 PM
any 98' news?

ViciousVette
February 14th, 2005, 06:31 AM
any news for '97/98 C5's too?

Blacky
February 14th, 2005, 08:01 AM
The latest beta version of EFILive contains the code to read and write 98 bin files. And the the ability to configure a calibration definition file.
A 98 forum has been set up (not public yet) which will be used to gather information to build the98 calibration definition files.

Lastly we need to write the bootloaders so that you can actually read/write the bin files from/to your PCM.

It could be as early as March, it could be as late as May.

Regards
Paul

JxxxOxxxE
February 14th, 2005, 08:27 AM
if the 98' forum is not public, is there any way I can contribute to the progress?

87gmc
February 14th, 2005, 10:20 AM
The latest beta version of EFILive contains the code to read and write 98 bin files. And the the ability to configure a calibration definition file.
A 98 forum has been set up (not public yet) which will be used to gather information to build the98 calibration definition files.

Lastly we need to write the bootloaders so that you can actually read/write the bin files from/to your PCM.

It could be as early as March, it could be as late as May.

Regards
Paul

Well if its march i can wait but if its may :shock: Paul if you can keep us up semi up to date. If you honestly feel it wont be till may I may have to a mail tune temporary :cry: