Some 7.3 PR 010 bugs

[PSWired]

Several things I've noticed that are fishy since upgrading to 7.3 pre release 10:

I'm running the 12212156 OS, which is an 02 3/4 ton Silverado 6.0 / 4L80e, with calibration 12212156.cal.

Getting some wierd out of range errors when the tune file is loaded. Many temperatures were changed from 284 to 252, which seems normal.

My B3601 was at 14.68 and was reported as out of range and changed to 1.00 even though the listed valid ranges are between 10.00 and 20.00.

My B3808 max speed for idle LTFT is listed as having a minimum value of 111 MPH and a max value of 222 MPH. My value of 3 MPH falls out of this range and gets flagged.

Also, after changing several of the out of range temps to the high limit, 252 degrees F, they are still flagged as out of range. G1202 is an example.

If you need my .tun file I will be happy to supply it. Thanks!

[Dirk Diggler]

My B3601 was at 14.68 and was reported as out of range and changed to 1.00 even though the listed valid ranges are between 10.00 and 20.00.



Sounds like this one is because the units have been swiched from EQ ratio to AFR and the program hanst taken that into consideration

[Blacky]

All of those symptoms are because EFILive is still using old (out of date *.cal files).

Please download ALL *.zip files from this page:
http://www.efilive.com/downloads/downloads_os.html
(11 downloads in total)

Then unzip the "cal" files into:
\Program Files\EFILive\V7\Calibrations

unzip the "tun" files into:
\My Documents\EFILive\V7\Bins

Overwrite any files with the same name.

When you load up your *.tun files you should see the calibration file version as 7.70 and the date as October 04.

Regards
Paul

[PSWired]

Whoops, looks like I missed an installation step. Sorry to use up your guys' time. It's all working now.