PSWired
October 8th, 2005, 06:25 AM
Several things I've noticed that are fishy since upgrading to 7.3 pre release 10:
I'm running the 12212156 OS, which is an 02 3/4 ton Silverado 6.0 / 4L80e, with calibration 12212156.cal.
Getting some wierd out of range errors when the tune file is loaded. Many temperatures were changed from 284 to 252, which seems normal.
My B3601 was at 14.68 and was reported as out of range and changed to 1.00 even though the listed valid ranges are between 10.00 and 20.00.
My B3808 max speed for idle LTFT is listed as having a minimum value of 111 MPH and a max value of 222 MPH. My value of 3 MPH falls out of this range and gets flagged.
Also, after changing several of the out of range temps to the high limit, 252 degrees F, they are still flagged as out of range. G1202 is an example.
If you need my .tun file I will be happy to supply it. Thanks!
I'm running the 12212156 OS, which is an 02 3/4 ton Silverado 6.0 / 4L80e, with calibration 12212156.cal.
Getting some wierd out of range errors when the tune file is loaded. Many temperatures were changed from 284 to 252, which seems normal.
My B3601 was at 14.68 and was reported as out of range and changed to 1.00 even though the listed valid ranges are between 10.00 and 20.00.
My B3808 max speed for idle LTFT is listed as having a minimum value of 111 MPH and a max value of 222 MPH. My value of 3 MPH falls out of this range and gets flagged.
Also, after changing several of the out of range temps to the high limit, 252 degrees F, they are still flagged as out of range. G1202 is an example.
If you need my .tun file I will be happy to supply it. Thanks!