AtuoVE problem with BEN

[stevedarman]

Hello I am new to EFILIVE and I am trying to tune my VE table with autove. I have been following the tutorial and logged my ben table I have found most of the numbers are around 0.50 to 0.57 which to me is way off when i use copy with labels and multiply and paste this halves the numbers in the VE table and the vehicle is lean. I believe the ben table is not right may be my settings. I have re calibrated the LC-1 and and using the V2 it showes AFR between 13 and 13.8;1 which i believe is accurate.
I have the LC-1 with serial connection to V2 and
Can any one help me

[GAMEOVER]

Post up a Data Log or your current tune...

[stevedarman]

Thanks for a quick reply

[stevedarman]

Can you confirm the PID i should be using with serial connection?

[mr.prick]

You have the wrong PIDs selected.
You need to select:
EXT.WO2AFR1
EXT.WO2ST1
CALC.BEN1

[joecar]

Stevedarman, welcome to the forum...:cheers:

See Mr.Prick's post above.

Note also that you still have close loop enabled, see B4205.

What vehicle and mods do you have...?

[stevedarman]

I have camshaft close to 300 kw and high flow exhaust.
i will go through and check for closed loop

[stevedarman]

Great stuff it is all working now and the fun begins
Thanks alot