PDA

View Full Version : Egr cooler delete



getsome
July 25th, 2009, 08:47 AM
how do i get rid of the codes after i take out the egr cooler help me asap
jim

GMPX
July 26th, 2009, 10:31 AM
Did you disable the DTC's?

getsome
July 27th, 2009, 01:49 AM
how do i do that i dont really mess with efi live that much

DmaxHawk
July 27th, 2009, 02:29 AM
Go to table C6001 and disable all the EGR related codes. (P0401, P0402, P0403, Etc..)

getsome
July 27th, 2009, 04:49 AM
how do i make a smoke tune

DmaxHawk
July 27th, 2009, 01:29 PM
pretty full question. The rule behind any engine is to have fuel and air burning equally together to achieve a constant and controlled expansion inside the cylinder. The principal behind the smoke tune is to have a lot more fuel burning than air which creates the soot. So basically add fuel and keep the timing and boost tables the same.

getsome
July 27th, 2009, 01:59 PM
What table is the fuel i understand how it all works but i just dont understand how to do it

DmaxHawk
July 27th, 2009, 02:13 PM
Gotcha. Basically you will need to look at tables B1102 and B0720. Start increasing the pulse width on the bottom right side in increments. same with the commanded fuel. Do this at your own risk