PDA

View Full Version : GENIII 4wd to 2wd conversion


BlownSierra
August 10th, 2009, 05:28 PM
I went from a 4wd 4l60e to a 2wd 4l80e. I removed the tcscm to shut off the light on the dash. Now when I scan for dtc's I get an error saying that there was no response from the tcscm. How do I get it to no longer search for that module?
joecar
August 11th, 2009, 03:55 AM
Goto Edit->Properties->Advanced and uncheck the box for Check/Clear DTCs for All Modules.

And welcome to the forum...:cheers:
BlownSierra
August 11th, 2009, 01:13 PM
Great thank you. So there is no problem with it expecting it and it not being there?
joecar
August 11th, 2009, 01:34 PM
If you uncheck that box, then the scantool will only check the PCM.
BlownSierra
August 11th, 2009, 04:52 PM
Awesome. Thanks much man.