PDA

View Full Version : Tow / haul and shift times


BlownSierra
August 11th, 2009, 06:00 PM
How do I set the settings for the trans once the tow / haul button is pressed? Is that the performance mode in the trans tables? Also, for a 4l80e, can the shift times be reduced? If so where is the table?
joecar
August 12th, 2009, 06:05 AM
Yes, those would be the "performance" tables.

The shift times tables are D1108, D1109, D1110 for both 4L80E and 4L60E.
Cablebandit
September 9th, 2009, 09:50 PM
can we run a trigger wire to do this on fbodys? it would be nice to have some lockup on mountain cruises with our stalls. It seems like it might be c1-pin 59
nonnieselman
September 10th, 2009, 02:39 PM
can we run a trigger wire to do this on fbodys? it would be nice to have some lockup on mountain cruises with our stalls. It seems like it might be c1-pin 59

D0409 :D
Set it to one switch..

"Switch types used must be momentary connect to ground."