nchristian
August 14th, 2009, 02:46 PM
I have a 2004 silerado with 4l70E and lq9 6.0l.I have put a
10 inch,2500 stall. It is a midwest converter. Im get about up to a 200 rpm slip when going about 50mph when lightly accel.(like going up a hill).the slip is causing a vinration noise.(this is the 2nd converter).I was needing a little help. Is there anything i can do to increase the pressure to the tcc or anything else to help with the slip.
10 inch,2500 stall. It is a midwest converter. Im get about up to a 200 rpm slip when going about 50mph when lightly accel.(like going up a hill).the slip is causing a vinration noise.(this is the 2nd converter).I was needing a little help. Is there anything i can do to increase the pressure to the tcc or anything else to help with the slip.