v2 pids

[ls1miata]

Need a little help wth a v2 if i hit f1 its says sample pids do i have bad unit i am using a lm1 serial hookup.

[joecar]

If it says "Sample" when selecting BBL pids, then that might be the sample pid list...

You have to start Scan&Tune and then select Black Box Logging... this will bring up the window you see behind the popup in this pic:

http://forum.efilive.com/attachment.php?attachmentid=5550&d=1244477039

Select your controller and name your pidlist(s) in the blue section (rightclick->Properties on a pidlist).

Drag pids from the yellow section to the green section.

Rightclick->Propterties on a pid in the green section brings up that popup where you can set alternate units.