PDA

View Full Version : Auto VE help


Slow73
August 29th, 2009, 04:08 AM
Hi,
Im trying to do some AutoVE logging and im having a problem. Selected the correct PIDS and set up the Map from the tutorial. Im using an LC1 and I believe its set up correctly. Heres my issue....im able to watch my AFR in the data section. When I select the dashboard page, no AFR is shown. I can record my AFR but im not able to play it back and watch it on my dashboard. Am I doing something wrong? Thanks.
mr.prick
August 29th, 2009, 04:38 AM
Did you add a gauge to the dashboard for AFR?
IIRC the default dashboard only has LTFT, RPM, VSS, TPS, Commanded AFR.
Slow73
August 29th, 2009, 05:44 AM
Thanks for the reply......I didnt add any guages...can you go more into this as im a newbie?!?! How do I add a guage for my LC1? Thanks.
mr.prick
August 29th, 2009, 06:09 AM
Right click the dash> add new gauge.
Making gauges can be a little tricky.
Here's a sample one that I made, the BEN & AFR gauges are for serial WBO2.
You can change the AFR and BEN gauge properties for your WBO2. 6080
http://i235.photobucket.com/albums/ee259/whitespar/Dash.jpg