wideband pid help......

[blackbeast ss]

i have a aem wideband 6-1 eugo and cant find a pid for it....i tryed plx and fjo and my wiedband reads 11.5 and on efilive it reads 8.1 is my wideband bad???
thanks in advance

[mr.prick]

Which one do you have?
AEM has a few, one in particular is non linear.
6085

[blackbeast ss]

this one http://www.aempower.com/ViewProduct.aspx?ProductID=73#

[mr.prick]

CALC.AFR_AEM & CALC.BEN_AEM are the ones you want.
The other 4 are for the non linear (dual) AEM.

[blackbeast ss]

does don't appear on my pid list
where could i find does cal?

[mr.prick]

Post #2 (http://forum.efilive.com/showpost.php?p=102661&postcount=2) has a .txt with them.

[blackbeast ss]

dam bro i have no clue how to do that ......sorry kind of new at this

[mr.prick]

If you don't have any other calc.pids you can save it as the calc.pids.txt in
C:\My Documents\EFILive\V7.5\User Configuration
or you can copy them to you existing calc.pids.txt

[blackbeast ss]

ok cool thanks which one do i use aem or aem 1?......and i got it on ext anolog voltage 1 is that correct?

[mr.prick]

:confused:
What exactly is the error? (screen shot)
I replaced mine with it and got no error.
If you download the file to C:\My Documents\EFILive\V7.5\User Configuration
it will need to be renamed, calc_pids.txt

[blackbeast ss]

i updated my post now i could chose aem on pid list thanks which one is it i got aem and aem 1 ?

[mr.prick]

calc.afr_aem & calc.ben_aem

[blackbeast ss]

ok i was able to select aem but aem ben says its not a valid pid???
im i doing something wrong??

[mr.prick]

CALC.AEM_AFR & GM.AFR must also be selected.
If have a GEN4 vehicle you will need to change the commanded AFR PID to the
one that matches the PCM/OS in the calc_pids.txt

Example:
For an E38 PCM change
*CLC-00-014
factor 0.0 2.0 0.2 "({CALC.AEM_AFR}/{GM.AFR})"
to
*CLC-00-014
factor 0.0 2.0 0.2 "({CALC.AEM_AFR}/{E38.AFRATIO_DMA})"

How to create an extra external PID (linear WBO2 example) (http://forum.efilive.com/showthread.php?t=132)

[blackbeast ss]

i went out for a spin and its pretty accurate to what my gauge reads thanks bro
im using pid cal aem and external voltage 1 .......im not using aem ben and its working fine