rpm threshold

[NviouSS]

i changed my in gear thresholds to 6850 upper and 6775 lower. should i change the in p/n threshold to the same? i also have the fuel cut-off set at 6800 in gear but left the p/n cutoff at 6500. should i change those to the in gear settings also?

[Black02SS]

I would change them just for the fact if you decided to launch hard at 6800 rpms. LOL Actually in a M6 the in gear is all that is used. P/N I believe is only referenced for Autos.

[Blacky]

Actually in a M6 the in gear is all that is used. P/N I believe is only referenced for Autos.

Some tables (not all) use the P/N values when the clutch is pressed.
Paul

[NviouSS]

8) i'll change them before i flash the pcm