Innovate LM-1 wideband hook-up

[01Z]

Please correct and add instructions if you can.

I'm connecting the LM-1 #2 analog wire (white) to the FlashScan AD1.

I've selected two PIDs; they are as follows:

External Analog Voltage 1 AD1
Base Efficiency Numerator 2 - LM-1 {CALC.BEN_LM12}

I have the WB sensor in bank #2 but should I use Numerator 1 instead??

Finally, what gauge should I use on the dashboard and is there anything else I need to do - any other PIDs to include?

[mr.prick]

The #2 PIDs are for dual WBO2s , bank1 and bank2
You can use them instead of the #1 PIDs but make sure the #s match. (AFR1 & BEN1 ect.)
You will need to select GM.AFR & CALC.AFR_LM11 or CALC.AFR_LM12
for BEN1 or BEN2 to be valid.

[joecar]

Like mr.prick said, the BEN numerator refers to the AD channel number regardless of bank number...

e.g.
BEN1 <-- AD1
BEN2 <-- AD2

[01Z]

Okay thanks! I'll see what and how the data gets displayed when the time comes I guess. It should make more sense when I see it.