PDA

View Full Version : Innovate LM-1 wideband hook-up



01Z
September 23rd, 2009, 10:04 PM
Please correct and add instructions if you can.

I'm connecting the LM-1 #2 analog wire (white) to the FlashScan AD1.

I've selected two PIDs; they are as follows:

External Analog Voltage 1 AD1
Base Efficiency Numerator 2 - LM-1 {CALC.BEN_LM12}

I have the WB sensor in bank #2 but should I use Numerator 1 instead??

Finally, what gauge should I use on the dashboard and is there anything else I need to do - any other PIDs to include?

mr.prick
September 24th, 2009, 01:49 AM
The #2 PIDs are for dual WBO2s , bank1 and bank2
You can use them instead of the #1 PIDs but make sure the #s match. (AFR1 & BEN1 ect.)
You will need to select GM.AFR & CALC.AFR_LM11 or CALC.AFR_LM12
for BEN1 or BEN2 to be valid.

joecar
September 24th, 2009, 02:10 AM
Like mr.prick said, the BEN numerator refers to the AD channel number regardless of bank number...

e.g.
BEN1 <-- AD1
BEN2 <-- AD2

01Z
September 24th, 2009, 02:21 AM
Okay thanks! I'll see what and how the data gets displayed when the time comes I guess. It should make more sense when I see it.