PDA

View Full Version : scan tool



jaglmm
October 20th, 2009, 12:17 PM
hi guys im new to the forum and efi live ..

i cant get the gauges to work on my lmm on my laptop.. can anybody help me out with this or is this a common problem?

Brian1
October 20th, 2009, 12:25 PM
Sorry misread the post.

Brian

Brian1
October 20th, 2009, 12:29 PM
First goto this post and download and install the latest for both V7.5 and V8 software.
Get that will go from there. Post your bootblock and firmware version on the flashscan V2.
http://forum.efilive.com/showthread.php?t=12014

Brian
__________________
2007.5 GMT-900 Chevrolet Silverado 2500HD CC/LB LTZ 4x4 Summit White.
With the LMM Duramax 365hp/660tq, MW7 Allison 1000 6-speed
Upgrades: 5" MBRP Turboback 6020AL from Nate at www.performancetruckproducts.com, EFI-Live V2 from Nick at www.duramaxtuner.com, EGR Blocker from http://www.alligatorperformance.com/ , Airdog 150 Gen 1 Lift Pump, Labonte Water/Meth Stage III, Diamond Down Pipe from Tyler at http://www.meyerperformance.com, Suncoast IV with 1056 converter done by Eric at http://www.merchant-automotive.com , Amsoil Synthetic Fluid in everything, Tierod Sleaves, Pitman Arm Fix, DashHawk II with external EGT sensor in Edge Dash Pod, PPE air box mod, Stanadyne, Line Of Fire.
EFILive LMM DSP5 Settings, 500HP, 450HP, 400HP,Tow with Turbine Brake, and Stock HP.
Future: Rocker Pods, Turbo, ARB Front Locker, On Board Air, Air Horn.

UA Steamfitter, Local 136 Evansville, IN - Remember if you want to play you got to pay.

joecar
October 20th, 2009, 02:21 PM
Hi jaglmm, welcome to the forum...:cheers:

Can you post some screenshots... of the following scantool pages:
- PIDs tab,
- Data tab,
- Dash A tab,
- Dash B tab.


See post #2: showthread.php?t=3064 (http://forum.efilive.com/showthread.php?t=3064)