PDA

View Full Version : This is my log. What next?



sinr98
October 23rd, 2009, 09:03 PM
Here is a log of my mail order tune. I have a Magnaflow catback, ported and polished TB, coolant bypass, MSD 8.5 wires, Cold air intake, 160* t-stat, fully built 4L65E trans with shift kit. All of this is on a 04 Silverado SS 6.0L, AWD. I am new to tuning, and I am looking to get the most out of my truck. both power and economy. I replaced my battery a few months ago and since then it seems as my mpg's went down a bit. I don't know if it's me or the truck. Thanks for all your help.

LM7Tuner
October 24th, 2009, 09:41 AM
You logging a lot of PID's might want to bump it down to under 20.

joecar
October 24th, 2009, 09:44 AM
Log these pids:
TP
VSS
RPM
DYNCYLAIR
DYNAIR
MAF
MAP
IAT
ECT
AFR or EQIVRATIO
SPARKADV
KR
LONGFT1
LONGFT2
IBPW1
IBPW2
TCCMODE

Keep the pid channel count to 24 or fewer channels to get the highest sample rate.

sinr98
October 24th, 2009, 04:06 PM
Ok will do. I haven't had the chance to get any logging done but I will have a chance soon. That is why I logged so many PIDS on that go around. Thanks for simplifying the needed PIDS too.