PDA

View Full Version : Why always 10 Degrees at WOT



1bar
November 5th, 2009, 11:33 AM
Hello Everyone,

Im running COS3 in Speed density. My setup is a 2000 camaro, 427 with two TC66 turbos. I have the car properly in SD mode.

When I hit the gas the timing drops all the way to 10 degrees and never really comes back up even if I am commanding 11 or 12 degrees.

I am going to log all of the timing pids I can find, but I do not understand why it wont run higher or even lower timing.

I tried setting the timing in the 1.20 Dyclair in the tune tool to 9 and even 8 degrees of timing, but it always sits at 10??

Any help would be appreciated.

Thanks,
Glenn

GAMEOVER
November 5th, 2009, 04:10 PM
Post up your tune....:D

1bar
November 6th, 2009, 11:29 AM
I will try and get my tune posted up later tonight. Until then I will be logging more pids related to timing.

Thanks,
Glenn

joecar
November 6th, 2009, 12:56 PM
Also log DYNCYLAIR or DYNCYLAIR_DMA.